BR Class 37 with working functions by Jon Reynolds

Image of BR Class 37 with working functions by Jon Reynolds

About BR Class 37 with working functions by Jon Reynolds

The BR Class 37 Diesel Electric locomotive, with working functions.

This is my 3rd attempt at recreating the prototype which runs on standard Lego track and is powered through the rails using the old 9V system. The model is based roughly on the 1980 appearance, 20 years after introduction in BR Blue with TOPS codes and split headlamps showing marker lights.

The model uses 2 standard 9V train motors, one in each bogie and a separate 9V Technic motor within the body to operate the roof-mounted fan. The drive motors are electrically linked to prevent stalling on dead spots and to even the load for an impressive tractive effort and speed. The marker lights at No.2 end are illuminated using 2 standard 9V lamps, connected to the motor feed via 9V wires and plates. The marker lights at No.1 end are dummy but look more to scale.

The fan motor is engaged via a Technic polarity switch mounted within the body but operated by a discreet switch on the side of the loco’. The same circuit also illuminates the red tail lamp (standard 9V lamp).

It has been built 7-wide, approximately to the same scale as an O gauge model, although a little taller and shorter. It is a complex shape to portray, with tapering ends, inclined cab windows, tumblehome and the very subtle slope along the top of the nose.

During the build process, a Stud.io digital model was created alongside to prove the concept and provide easy reference for any required changes. An alternative build using the later variant without end doors would have been easier!

© Brick Train Awards, an idea by Bricks McGee and LNUR. The LEGO Group does not own or endorse the Brick Train Awards. LEGO® is a registered trademark of the LEGO Group.

Terms for competition entry. Press & media queries. In the media.

Website design by Peacock Carter