Pennsylvania Railroad class A3 0-4-0 shifter (Former class U) by Liam Orr

Image of Pennsylvania Railroad class A3 0-4-0 shifter (Former class U) by Liam Orr

About Pennsylvania Railroad class A3 0-4-0 shifter (Former class U) by Liam Orr

The A3 0-4-0s were the largest (numerically speaking) steam locomotives of that wheel arrangement on the Pennsylvania Railroad. Built between 1895 and 1905, they were originally designated as the U class before the PRR reclassified them to class A3 as part of a wider effort to reclassify their wide assortment of motive power in the late 1890s. The "A" means that the engines were of the 0-4-0 wheel arrangement and the "3" means they were the 3rd such standard design. They had 50-inch drive wheels, 17 x 24 inch cylinders and featured the Pennsy's trademark Belpaire firebox, although this was largely hidden by the cab. The A3s were equipped with a small slopeback tender that could hold 7,700 pounds of coal and 2,700 gallons of water. In later years, these were the smallest tenders on the PRR to receive their own classification and were classified as 27S48 tenders. A full 4th of the class would later be rebuilt as saddletank locomotives and reclassified as A3a. These engines worked in railroad yards and industrial facilities, handling the movement of rolling stock such as freight cars and coaches and constructing consists for the mainline motive power. Replaced by locomotives of the larger A4 and A5s classes in the 1910s and 1920s, many A3s were sold to new owners, but all were eventually scrapped. None survive today.

My model is built in 1:48 scale, which makes the model seven studs wide. It features number 8 sized drive wheels, and roller bearing wheels on the tender. The locomotive is powered by a circuit cube motor which connects to the battery box in the tender. The hardest part for me was creating the small, 7 studs wide tender. It uses several complex building techniques to pull off the slope. Pulling off the 7-studs wide cab was also a challenge, and I will need to see how stable the connection is when I build this engine physically. But for now, I am happy with the way it turned out.

© Brick Train Awards, an idea by Bricks McGee and LNUR. The LEGO Group does not own or endorse the Brick Train Awards. LEGO® is a registered trademark of the LEGO Group.

Terms for competition entry. Press & media queries. In the media.

Website design by Peacock Carter